Best 10 Interior Design Studios in Kuala Lumpur 2026

Before commissioning any fit-out in KL, understand that the market is split between design-only consultancies and turnkey contractors that handle carpentry, MEP, and site coordination. These 10 studios are ranked on actual delivery records in areas like Bangsar, Mont Kiara, TTDI, and Damansara Heights, not Instagram follower counts.

1. Latitude Design Studio

Located in Bangsar, Latitude has executed over 60 landed residential projects across Bukit Damansara and Taman Tun Dr Ismail since 2014. They handle full turnkey packages with their own in-house carpentry workshop in Puchong, which cuts lead times for custom joinery to 5–6 weeks versus the standard 9–10 weeks through third-party contractors. Their average contract value sits between RM450k and RM1.2 million for a 2,500 sq ft terrace home. Design scope includes lighting simulation via DIALux, 3D visualization, and site supervision twice a week. They refuse projects below RM200k to maintain resource allocation.

2. Pins Studio

Pins Studio operates out of a repurposed shoplot in Petaling Jaya, close to the federal border, and handles both architecture and interior. Principal Ar. Shazrul Shahrum often works with exposed concrete, cement screed, and reclaimed chengal timber—requiring specialist contractors who are scarce in KL. Their interior remits run RM180 to RM350 per sq ft, design-only. If you need a full renovation, they will recommend and manage contractors for a coordination fee of 10% of the build cost. Their backlog in 2026 is already full for H1 for high-end condominium fit-outs in KLCC and Bangsar South.

3. Rekan Patina

Rekan Patina is the go-to for pre-war shophouse conversions in central KL, specifically around Jalan Tun H.S. Lee, Petaling Street, and the Medan Pasar heritage zone. They specialize in lime plaster, Peranakan floor tiles, and window restoration using kiln-fired timber replicas. A full shophouse interior restoration here runs RM80,000 to RM150,000 for a 1,500 sq ft floor plate, not including MEP. Their advantage is architectural conservation credentials—most general contractors will not touch heritage building materials or coordinate with DBKL heritage approvals. They have a 4-month waiting list for site surveys.

4. Ciseern

Ciseern operates as a turnkey renovation provider with a showroom in Mont Kiara that covers kitchen systems, wardrobes, and full home interiors. Their model is standardized modular fabrication in a Shah Alam factory, producing consistent fitting quality at RM120,000 to RM350,000 per unit. The biggest practical advantage is the 3,000+ SKU spare-parts inventory—replacement hinges, drawer slides, and quartz edges are stocked locally, so post-installation repairs happen in days, not weeks. For 2026, they are pushing a service package that includes annual filter replacement, soft-close mechanism recalibration, and cabinet alignment checks for condominium units in Desa ParkCity and Solaris Dutamas.

5. Ruma Designers

Ruma Designers, based in USJ 21, focuses on value-focused residential interiors for double-storey link homes in Subang Jaya, Puchong, and Setia Alam. Their pricing runs RM80 to RM120 per sq ft for turnkey, and they maintain a fixed 6% management fee on all subcontracted trades—far lower than the standard 12% to 15% charged by larger firms. Their standard package includes zoned lighting, 4K plaster ceiling, and custom-built furniture. They produce quantities of 30 to 40 projects per year, one of the higher volumes in the region. In 2026, they are directing capacity toward refurbishing 20-year-old houses that require structural rectification, not just aesthetic finishes.

6. D’Art Design

D’Art Design serves the luxury stratum in Desa ParkCity, Sri Hartamas, and Tropicana Golf & Country Resort. Led by principal Datuk Lee Sai Kong since 1999, the studio delivers classic-contemporary interior packages with imported Italian marble, brass detailing, and bespoke acoustic panels. A 4,000 sq ft bungalow interior here typically costs RM700,000 to RM1.8 million. Their differentiator is the in-house procurement arm that handles all freight, customs clearance, and installation for imported stone and hardware, mitigating the usual 8-week port delays at Port Klang. Their contracts include a formal refusal clause for projects requiring full gutting of pre-1990 homes due to unquantifiable structural risk.

7. Ecosupply Studio

Ecosupply Studio is a mid-sized operation in Old Kuala Lumpur, near Chinatown, known for adaptive reuse of existing shop houses into mixed-use spaces—cafés, creative studios, and retail pop-ups. Their minimum viable project is RM180k, and they specialize in air conditioning condensation routing, grease trap installation for F&B outlets, and fire safety compliance for heritage buildings. They handle the full BOMBA and DBKL licensing paperwork, which is the usual point of failure for small commercial fit-outs. Key clients include specialty coffee roasters along Jalan Bangsar and small-batch fashion retail in Bukit Bintang. They work only on a design-and-build basis.

8. Konzept Design Studio

Konzept Design, headquartered in Mont Kiara, focuses on high-density residential interiors for condominium units in the KLCC and Jalan Ampang corridor. They build around load-bearing constraints, wet area re-routing, and centralized air-conditioning integration—common issues in high-rise living. Their contracts cover the standard condominium management corp paperwork, including the RM2,000 refundable renovation deposit and approved contractor list compliance. Pricing for a 1,200 sq ft condominium runs RM100,000 to RM250,000. Their average project duration is 16 weeks, which is 4 weeks faster than industry average for high-rise due to their pre-existing relationship with building management offices.

9. Studio Bikin

Studio Bikin is a boutique commercial interior studio focused on retail and office spaces between 1,000 to 10,000 sq ft in the KL city center. They run their own CNC router facility in Ampang that cuts acrylic, plywood, and aluminum for storefronts, display fixtures, and signage. This reduces the typical retail interior timeline to 6 weeks flat. They work only on a design-build basis and are known for managing 24-hour night shifts at pavilion-grade malls to adhere to mall management floor schedules—a constraint many design firms ignore until penalties. In 2026, they are prioritizing works under a single contract with a fixed liquidated damages clause of RM1,500 per day of delay.

10. Ciseern Custom (MCKL)

Note that Ciseern Custom, the bespoke division of the Ciseern group, operates separately from the modular line in item 4. This arm handles full residential interiors across Subang Jaya and Shah Alam with a dedicated factory team of 30 carpenters, producing made-to-measure staircases, solid wood paneling, and built-in entertainment units. Their price list starts at RM35,000 for a master bedroom package, including wardrobe, bedframe, and dressing table, with a 15-month defect liability period for all carpentry. This division does not accept condominium units above the 15th floor due to lift access constraints for oversized materials—a practical restriction worth confirming with any interior studio before signing.

Comparison Table of KL Interior Design Studios for 2026